-
The BB-RS232 module is getting hard to find and very expensive. I tried an experiment where I used a generic [Serial to Ethernet](https://www.amazon.com/dp/B087J9F6LF) server and was able to communica…
-
1x USB - supports composite profile (config serial/Mass Storage - SD)
1x Universal Serial (RS232/LIN) - Could be used to receive GPS data or drive LIN devices (Alternator/Wipers)?
2x CAN2.0A
1x CAN…
-
## Version of the custom_component
1.8.0
## Configuration
no configuration yet, still trying to add the integration.
## Describe the bug
Inverter already being used through ModBus TCP with yo…
-
There was once a device called the Flyer (http://www.retroswitch.com/products/flyer/#) which provided 1541/71/81 drive capability AND ethernet access through IEC. Sounds like writing to device #12 or…
-
Ethernet with the Wiznet W5500 Ethernet Board
set up a static ip address and select ethernet instead of wifi in the webinterface
![image](https://user-images.githubusercontent.com/61190758/9995…
-
I am trying to communicate with a Fluke 1594A SuperThermometer. I have the documentation for the instrument which details the ASCII messages. I have created a driver for the instrument using the PyMea…
-
I have an SE10000 and an RPI2 running CentOS 7 with the requisite python libraries. My Inverter has the mini USB connector, so I'm using that connected to my RPI2. I've had success using semonitor to…
-
We are using the CSE-H20 converter (TCP to RS-232 converter).
It basically converts an ethernet signal with its communication to the RS-232 lanquage.
https://www.eztcp.com/en/products/cse-h20
htt…
-
Hi,
this is a feature request: I recently needed to connect to a Modbus-RTU device that is installed behind a TCP-to-RS232 converter. The installation of a virtual COM-port (often offered with thes…
-
**Device Description**
This device is an actuator used to control valves in a piping system. In this case, it is used to control a three way valve to control the flow of hydrogen between an electroly…
tjzay updated
5 months ago