-
Hi there, 1st of all thanks for this awesome work !
Since we've 'doxed' it in our [HyMPS project](https://forart.it/HyMPS) (under [VIDEO section](https://github.com/FORARTfe/HyMPS#-1 ) \ [PTZ page]…
-
Just wanted to share with you what is possible using this great Arduino-DW1000 ranging library :-)
https://www.youtube.com/watch?v=trp2rDtK4SQ
https://www.youtube.com/watch?v=SwiUzBPI0zg
(I'm s…
-
Hello Guys, I am having some trouble when running both the Two Ranging Codes (Initiator and Responder) and also with the 2-D Main Anchor and Tag Implementation codes. I am new to this and want to repl…
-
hi, I tried to install qemu riscv using the following link -
https://risc-v-getting-started-guide.readthedocs.io/en/latest/linux-qemu.html
But at the last step when I ran the command - make -j $(np…
TR174 updated
4 years ago
-
Hello,
Chipyard support rocket with NVDLA, but this project only support VCU118. I want to implement this rocket with NVDLA project on other FPGA prototyping paltform. Which means I can't use Xilinx …
-
It looks like your sample output IQ baseband at 1.4MHz sample rate. Further, it seems like you're saving the full IQ baseband. It would be pretty slick if you could tune the receiver to an offset fr…
-
Hello,
I have successfully built ss_twr_resp. I am getting error while building ss_twr_init. I have send the log here , there is controversy in _putchar.
Building ‘ss_twr_init’ from solution ‘ss_twr…
ghost updated
4 years ago
-
**Describe the bug**
I have really enjoyed RTL in general. However, in order to use it, I seem to be needing to hit the refresh button in my browser a lot. Is this to be expected?
**To Reproduce**…
-
**Phenomenon**
With the real NXO robot, I'm seeing that the connection to the nameserver gets lost once running the manufacturer's proprietary tool and "Connect" in "Validate" tab.
```
$ rosrun rtshe…
130s updated
10 years ago
-
With the same set of commands from https://github.com/start-jsk/rtmros_hironx/pull/482, NEXTAGE in the hrpsys-simulator doesn't do anything specific to impedance control.
I found when I run from Py…