-
Hi there,
I have some Roller Shades at home, which seem to be using the Somfy-RTS protocoll. I sniffed some packets with the rtl_433-plugin for SDR# as seen here:
 - a ham behind [digirig project](https://github.com/softcomplex/digirig).
The interface's sound card works with APRSDrooid, but there is also a serial COM port that allows PTT by…
yeti7 updated
4 weeks ago
-
it seems the hardware flow control lines (RTS/CTS) are not connected between sim7000 and esp32.
trying instead software flow control (`AT+IFC=1,1`), it seems the modem never sends XOFF, only XON.
…
-
Hi , I have a standard RTS receiver to open / close my gate.
i have tried to connect the receiver to my Homey, by adding the "Gate / Garage door opner " , but homey did not find the receiver.
Is the…
-
I set HiGHS gap limit to a very low tolerance of 0.9 and ran the Sienna performance test.
The julia deserialization function is taking 50%+ of the total time.
Hence, the main bottleneck by far.
I…
-
### Describe you new feature you'd like
Hi @rstrouse!
I am in the process of setting up ESPSomfy-RTS. Actually I am converting over from an old and unreliable `pushstack`-based implementation with…
-
Ich bekomme beim Versuch zu verbinden diesen Fehler
C:\Python3>python rdwr_phy62x2.py -p COM8 -e -r wh BOOT_TH05_v19.hex
=========================================================
PHY62x2 Utility …
-
srix updated
2 months ago
-
srix updated
2 months ago
-
srix updated
2 months ago