-
### Discussed in https://github.com/ExpressLRS/ExpressLRS/discussions/2479
Originally posted by **apiening** November 19, 2023
I have an airplane from **FMS** which has a **stabilizer** system…
-
Hello,
The idea here is to use the FrameLost status contained in the SBUS protocol to give an indication of the signal quality of the RC receiver, and use it instead of the analog based RSSI in all t…
-
I see in the 'expansion.md' file that SBUS is read on the CVBS pin.
Does it also need ground?
The document also says the signal needs '0x01 in first byte'
How do I know if my SBUS signal has the …
-
I have a FC Skystars F405 HD2 connected with a ESP32 (Arduino) by a serial link (100kbauds, parity even, 2 stop bits, inverted).
25 bytes are sent, starting with byte 0x0F and ending with byte 0x00.
…
-
hello,
i m not an exper in rc model and programation.
my configuration
-lrp 1600kv
-skyrc toro 150 amp
-radio fly sky fs-th9x
-recever fs-r9b (8 channel) pwm whis an encoder pwm to sumppm for co…
-
When using a PPM receiver with an autopilot that does not have an i/o coprocessor the RC Update Module isn't handling PPM RC Failsafe or RSSI correctly.
This was tested on an MRO Control Zero F7 b…
-
Hi thank you for the project.
I am using a diy transmitter with sbus output with no display. Its kind of difficult to control the profile selections.
Can we have a profile selection switch in t…
-
@csurf mentioned in #166 about plans to port to the STM32 platform so I though I'd open this issue to share the work I have done in this area and too see if there is any interest in using it.
So he…
-
**Is your feature request related to a problem? Please describe.**
Add a possibility to write directly to the output-buffer, that transferred via RF pakets. Also add a transactional / double buffer…
-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
There is always an issue with too many potential…