-
Is there a way to have a predictable naming strategy for the the `UDEV_DEVNODE` and `UDEV_DEVPATH` environment variables?
Using the hash to differentiate the different devices works as long as it's…
-
Using ser2net 2.9, default config for port - does not work.
Using 3.5 with the following config works OK:
3000:telnet:600:/dev/ttyUSB0:115200 banner remctl telnet_brk_on_sync -chardelay max-connec…
axcxl updated
5 years ago
-
## Version of the AMSHAN
The version is 2022.4.0
## Configuration
LGF E360 -> Homebrew adapter from hanporten.se -> Raspberry-pi with GPIO -> ser2net -> wifi -> Homeassistant OS in virtual…
-
Hi Ruud,
I have pi2 that is in my meter closet that is not running Node Red. I want to use it to bridge the serial P1 data over TCP using ser2net to the machine that runs node red.(How) Can this be d…
-
### Feedback
Hello,
in the section "ser2net" is information about the config for ser2net on an remote host.
I am struggling to find information about how to utilize the data coming from ser2net wi…
-
usbipis a neat way to uncouple serial ports from the hardware.
On one host serial devices are available and a usbip server offers them. When a remote system wants to use it it uses usbip client to "b…
-
{
"url": "https://sysupgrade.openwrt.org",
"revision": "r20028-43d71ad93e",
"advanced_mode": "1",
"branch": "22.03",
"efi": null,
"profile": "raspberrypi,4-compute-module…
-
Hello,
I went through closed issues but did not find anything in here yet describing the use of ser2net to connect an RFXCOM. I currently run all my domotics software (Home Assistant, Domoticz, Nod…
-
Update wiki and repo to not recommend/use ser2net in a container. There are race conditions that show up here.
galak updated
3 years ago
-
When we onboard a raspberry pi with the zigbee controller to talos we need a container that can mount the controller from usb and map it to tcp. Zigbee2mqtt can then connect to the controller over tcp…