-
Is there a sample config.h where the si5351 board is running? I conncected a board to pin header of RS41 Ports 2 SDA and 3 SCL - see 3,8 volt on the VCC on si5351 - also set Si5351 CW on but see no si…
-
Currently, I am getting no output on the SI5351. Checking the SDA and SCL signals using the Logic analyzer on my Digilent Discovery 2 using the I2C protocol produced quite a few errors. The Ardunio wa…
-
This is on line 180 of si5351.cpp. I believe the same issues occur with SI5351.set_freq_manual and probably other functions should be checked. This is important as VScode and other IDEs display thos…
-
Hi for a while I have been interested in building a GBS-C,
So I finally did. However, after soldering everything together I got a blank screen. So I tried to check if it had something to do with th…
-
Hi Alex,
Because I have use SI5351 https://learn.adafruit.com/adafruit-si5351-clock-generator-breakout/overview with 25 MHz Xtal I found in your source definition of XTAL in si5351-beacon/src/uti…
-
Hi,
there seems to be an incomplete code line in line 408. Something is missing behind the self.
ph_delay_reg = SI5351_REGISTER_165_CLK0_INITIAL_PHASE_OFFSET + self.
Can you, please, check
…
-
Jason,
First thank you so very much for all your effort in providing the si5351c library. This has been extremely helpful to me as I modify the 'all band' [0-2 GHz disciplined transverter](http://son…
-
I had a problem with the frequency generated by my White Buttons rig being incorrect. I was able to track it down to the failed initialisation of the `fxtal` member of class SI5351. The code intended …
-
Hello,
I have an error while compiling version3.5
version 3.4 is working nice.
There whas no adc.h file in the zip.
so i found something online and use that.
Thanks in advanced.
Ed PA1TR
…
-
Right after initializing ( so with default values for pll-source, plla )
Consider:
```
si5351.set_freq(8000000000ULL, SI5351_CLK0);
si5351.set_freq(15600000000ULL, SI5351_CLK0);
si5351.set_freq…