-
hi @T-622
great work! 👍👍👍👍👍
i'm sharing your project on my own "Open Hardware Electronics for the Volvo P2 platform"
[https://github.com/aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware/wiki/…
-
Should get these thoughts written down as an issue,
Here are the two candidates I am looking at, as far as tachs are concerned:
Good, but it is latch:
https://www.digikey.com/en/products/detail…
-
I'm struggling to get the Tachometer to use the right thousand and decimal separators.
It should be showing . as thousand separator and , as decimal separator (as in the gauge above the Tachometer)…
-
Was using your guide on the tach 3-pin hotend fan from Orion and noticed that Klipper wasn't reporting the RPM when attached to my Huvud CANBUS pcb when attached to 5V endstops. https://ellis3dp.com/…
-
By adding the HTTP headers to [enable cross-origin isolation](https://web.dev/cross-origin-isolation-guide/), it should be possible to get [higher-precision timing](https://developer.chrome.com/blog/c…
-
Sorry, maybe I'm writing the wrong way.
Could you add a red zone to the pointers similar to sectors, but which are not drawn from the center, but simply change the color of the scale that fell into…
-
On the AnalyticPhysics page for the assembly (see [here](https://analyticphysics.com/Diversions/Assembly%20Language%20Programming%20for%20LEGO%20Mindstorms%20EV3.htm#motor)), it states that when drivi…
-
https://github.com/FOME-Tech/fome-fw/commit/2ff394e3e9cd8fbf13e8d58633fead04acd48c21 does not work neither for existing CANbus dash profiles nor for Lua CANbus integration
-
@jaswsinc writes...
> I was just looking over some design concepts, when I saw this and it gave me an idea.
>
> ![http://static2.bigstockphoto.com/thumbs/0/7/4/large2/47001286.jpg](http://static2.bi…
-
#1
For the analog device: create it or export a solution from an online source.