-
Hi
After spending a lot of time on https://www.synthetos.com/topics/yet-another-spindle-flashing-light-problem-why-is-it-so-easy-to-crash-the-tinyg/#post-9646 eventually I got a reply via email from …
-
Background: CNCjs supports both g2core and TinyG from one chunk of code.
To stop a running job, it sends "!%" - feedhold and flush. On recent versions of g2core, that sequence has the problem that i…
-
Hi I installed tinyGS to my Heltec lora32 v3 board sx1262 lora radio but with 868MHz
I configuration there is no option for 868MHz only 433MHz
![Screenshot_20240415-122906](https://github.com/G4lile…
-
tgFX build 3009(Linux)
Jogging seems to be working relatively reliably.
However, if I move back and forth between jogging and CLI entry, it seems as if tinyG is in 'incremental' addressing mode after …
-
It recognizes my tinyG on COM4 but when I click "Go" to flash, the Programming Progress pop-up window says "failed verify". Running windows 8. Trying to update to 440.16 - tried 440.14 as well with …
-
The m5stack board is not in the supported board list, but I tested and compiled, uploaded TinyGS, with PlatformIO, in my m5stack board, with module LoRa 433, crossing my fingers that it works :). Comp…
-
With a working 1W custom ESP32/LoRa board now (thanks to you & Bob-N6RFM!), I noticed that the default tinyGS "Power" parameter (5 dbm) did not take advantage of this device's power output capability.…
-
Sometimes, TinyG changes aam parameter by itself. I have no idea what causes this. So far, a few people have reported it and only one more than once. As a workaround, there is a check at connection (c…
-
Ive had my ox cnc machine running a few months now. Have run a dozen or so different pieces with no issues. With the update of chillipeppr to the new multi axes system i started running into problems …
-
After LitePlacer software had crashed and killed via taskmanager, machine moves arbritrarily after restart of LitePlacer. I think TinyG is not correctly reinitialized.
Hardware reset on TinyG and reco…