-
## Issue description
I have the fealing that the `generate-config.pl` script is pretty bugged, it keeps failing with `repeated question` and spews out tons of `Error in reading or end of file.` aft…
-
hello,
i'm getting the following traceback from python when trying to send data to a Rigol mso1104z:
```
>>> import usbtmc
>>> usbtmc.list_devices()
[]
>>> ins = usbtmc.Instrument(0x1ab1, 0x04ce)
>>…
-
I bought a SKR1.3 with 2208 drivers for my CR10.
There is an error TMC connection error. Will take instructions from the display but make a terrible noise when moving on the z-axis towards the bed.…
-
I am running the S6 board with the Fysetc TMC2209 drivers and every time I enable TMC_DEBUG in configuration_adv.h and upload the firmware to the board, I do not get serial communication from the USB …
-
Hello, I am retrofitting an SKR e3 turbo on a Chiron 3d printer. I am randomly getting
On klipper:
“TMC ‘stepper_z’ reports error: GSTAT: 00000001 reset=1(Reset)
it freezes and asks for firmware_r…
-
I have a new SKR 2 rev B board and 5 BTT TMC2208 v3 stepsticks - I am getting "TMC CONNECTION ERROR" from the display at boot up, and M122 just shows:
Testing X connection... Error: All LOW
…
-
I've been developing a libsigrok driver for an rp2040. While I tried to search for what was out there I didn't find your implementation until a user of my repo sent me a link.
My repo is here:
ht…
-
### Wiki Search Terms
Motor, Axes, Motor issues, pretty much everything
### Controller Board
6-pack Universal
### Machine Description
Shapeoko 3XXL
![IMG_9752](https://github.com/user-…
-
Dear all,
We use Siglent SPD3303C over usbtmc connection (at debian11) and querying the device over pyvisa times out in most of the cases (only once I got an ID string). Device.write("XXX") works c…
-
I am trying to connect my printer via USB to windows 10 and use pronterface and I can get the printer connected but NOTHING ELSE HAPPENS. I was once able to move the print head left and right on the X…