-
### The problem
When using a WLED host with more than one GPIO output, and using the "Make a segment for each output" option, Home Assistant still only imports the FIRST segment, leaving any addition…
-
Do I have to remove some wires after flashing wled?
Do I need a certain wire type? What would happen if I didn't wire it correctly? How can I flash the original firmware? When should the controller …
-
### The problem
I am using the sound reactive version of WLED, but Home Assistant does not "know" that and wants to update to the latest stock version.
Obviously this breaks things and is very co…
-
Please add support for wled devices, similar to signalRGB's implementation: https://srgbmods.net/wifiled/
WLED is a very popular firmware for arduino (esp based) microcontrollers, and provides mDNS…
-
### The problem
The firmware sensor is spamming my logbook whenever I change _anything_ on its entities/sensors (such as turning on/off / configuring color/intensity in any segment, or changing any u…
-
I cannot flash wled to a wemos S2 mini with the web installer (esp8266 and esp32 are ok)
I have also tried the alternative bootloader without success.
I have been holding the board in bootloader mod…
-
### What happened?
Good morning,
I have a problem with reporting information from the BME280 sensor or I only have the temperature and pressure reported in Home Assistant. Except I have the temper…
-
### What happened?
Simply updating to 0.15.0-b2 makes one of my panels no longer light up. I use GPIO 5 for panel 9 in a 2D matrix. Reverting back to 0.14.3 (or even 0.15-0-b1) fixes the issue. I use…
-
Tried updating my SP511e with this updated firmware and get the error: Update failed! Please check your file and retry!
https://github.com/srg74/WLED-wemos-shield/blob/master/resources/Firmware/%40…
-
### What happened?
* I have a WLED controller that uses a local GPIO pin to run a string of SK6812 LED's; everything is working perfectly well (v0.15.0-b4).
* I wanted to add a second controller's…