-
I tested FT8 and it works. However, there have been some issues where a wider pulse appears every time the symbol switches, which can contaminate the spectrum. And only after clicking "open" to open t…
-
Hey guys ;-),
I have implemented a synchronization with the Pico internal RTC in a fork of Roman's ingenious pi pico wspr project:
https://github.com/Jochen-bit/pico-WSPR-tx
All you have to do is s…
-
Hi,
I notice that the WSPR extension defaults to a narrow CW bandwidth rather than the more usual 2.4KHz USB bandwidth.
WSPR has been optimised to expect a 2.4KHz wide block of signals and extra…
G8JNJ updated
7 years ago
-
Why?
- Often timestamp issues that ignored because "it works on APRS.fi"
- Causes the map to mess up
- Packets are often transmitted multiple times with new timestamps which breaks calculating …
-
Hi my rpi 3b is not working plus i have used issue 41's code and it still doesn't work !
here is the code:
```
cc -Wall -c mailbox.c
mailbox.c: In function ‘mapmem’:
mailbox.c:62:35: warning:…
-
error raised during execution
`FileNotFoundError: [Errno 2] No such file or directory: 'wspr_spots.txt' `
manually "touched" wspr_spots.txt in /root directory, error is gone
djbr1 updated
2 years ago
-
Hallo Roel
Ik zou deze WSPR "zender" graag nabouwen, kun je me uitleggen hoe en waar de gps module aangesloten moet worden ?
En is het voldoende om het bestand "WSPR_beacon_arduino.ino" in mijn ardu…
-
When I use `context.SetMaxTokensPerSegment` and `context.NextSegment`, it generates incomplete segments. e.g. when tested using the jfk.wav sample, it gives the following output:
```
wspr_test.go:…
-
hello I have a problem with a Light APRS (+WSPR) tracker 1.0 I followed the procedure to the letter I connected the two antennas with sma sockets I compiled and modified the settings that I needed I h…
-
FT8 (default) ~
FT4 +
WSPR !
What is the code for FST4W ?
>>> from the file config.py >>> MODES = {'~': 'FT8', '#': 'JT65', '@': 'JT9', '+': 'FT4', '!': 'WSPR', '`': 'FST4W'}
Typo in Example …