-
Hi. I'm trying to integrate cargo-embed (with both RTT and GDB) into a VSCode debug extension. Without the RTT output, it behaves rather well, but as soon as I turn on RTT, it causes a problem.
…
-
virtual unwinders (\*), for example based on `gimli::{DebugFrame,UnwindSection}`, are not able to unwind through external assembly subroutines like `__nop` because these subroutines lack [CFI](https:/…
-
**Describe the bug**
Any `probe-rs` calls towards the MCU fail. SWD seems to end in an endless recursion.
**To Reproduce**
Steps to reproduce the behavior:
1. Connect jlink via SWD to lpc55s69…
-
It would be very useful for embedded debugging to view/edit registers of peripherals.
This feature is available in the CDT plugin for Eclipse and also the Cortex-Debug plugin for vscode.
You would…
-
stb_image being used on a STM32 ARM Cortex-M7 micro controller.
Firmware built using gcc.
https://github.com/nothings/stb/blob/013ac3beddff3dbffafd5177e7972067cd2b5083/stb_image.h#L5121
stb_ima…
-
Currently, the built-in peripheral viewer has less functionality compared to [mcu-debug/peripheral-viewer](https://github.com/mcu-debug/peripheral-viewer).
From what I noticed:
- Enumerations are …
-
I'm using a Raspberry Pi 3B+ board with OpenWRT OS (v23.05.2) and trying to use a Semtech SX1302 LoRa Corecell interface board via USB interface to use them as a LoRa Gateway setup (RPi + Semtech SX13…
-
When compiling the following repo with zig version `0.11.0-dev.3138+87de8212ad` I get a compiler segfault.
I was not able to isolate the issue to a simple example so I made a repo.
Repo: https:/…
-
"As a devops engineer, I want to be able to quantify the number of connections to each pod, to determine the level of load".
E.g.
- when you would expect one connection, check there is only one c…
-
track_targets performs better when compiled to use a single thread for marker detection:
`MParams.maxThreads = 1;`
When compiled for multiple or maximum threads: `MParams.maxThreads = -1;`, performa…
fnoop updated
6 years ago