-
I built freedv-1.8.10-devel yesterday (31/05/2023) from git master at 0c096ed and all was fine.
Today I saw that 1.8.10 final was released and was all set to push this new release to Mageia (just i…
-
I've noticed that on some systems FreeDV seems to hang for a second or two before it actually starts after pushing the Start button. This seems to be due to hamlib's connection logic not happening in …
-
By request from the digitalvoice list, there should be something in the options to revert to the pre-1.8.10 behavior for Hamlib (as in, frequency and mode are read only and only PTT is touched).
-
On the FT-817/818 (and likely 857/897 as well, though untested), frequency changes fail when going from 20 meters or above to 40 meters or below as FreeDV tries to also change to `RIG_MODE_PKTLSB` mod…
-
[FreeDV Issue.docx](https://github.com/drowe67/freedv-gui/files/10932373/FreeDV.Issue.docx)
-
Hi Mike,
Nate told me to reach out to get the Anytone AT-D578UVIII added as a rig. I was able to figure out how to get CAT PTT working with it. https://github.com/jrobertfisher/AT-D578UV-software-m…
-
[v1.8.8-20230116]
FreeDV is compiled from source (freedv-gui-1.8.8-20230116.tar.gz) and packages are made
OS: Ubuntu 22.04
Installing freedv_1.8.8-devel-2023-01-17-_amd64.deb gives the following …
-
Hello!
While building release 1.8.7 of freedv on openSUSE, I got this error:
/home/wk/rpmbuild/BUILD/freedv-gui-1.8.7/src/dlg_easy_setup.cpp: In member function 'void EasySetupDialog::OnTest(wxCom…
-
9:52:56.417 INFO: DATA [DJ2LS]>> |> |
-
At the moment we are decoding simultaneously in a multithreaded time based way.
I want to improve this so decoding is just one thread and we can decode simultaneously every mode we want.
For this we n…