-
Hi,
strange behaviour after enabling REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER.
Homing Z axis reset m256+ramps aprox. after few second (5 or 10) after z axis start moving.
Every LCD type i en…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
During the print the layer is shifted by the machine.
### Bug Timeline
The bug has occurred…
-
-
Hi @gsl12! Thanks for sharing your work!
I am actually searching and ordering parts for building my Tiny-M and I have some nema17 48mm motors with 1.8deg I wanted to use. In your BOM you recommend 0.…
-
I upgraded to the latest version of Marlin when I added a 2nd extruder and used the board 34 configuration. Every thing works great but I get mid print failures all the time. Every time it fails there…
-
**Description**
When I run my code the motor randomly spins in the wrong direction sometimes.
**To Reproduce**
Steps to reproduce the behavior:
1. Installed libraries
2. Ran code
3. Motor spin…
-
Hello!
Looking to see if someone more knowledgeable then myself has any insight into if this library would be useful in controlling a NEMA17 Stepper (https://openbuildspartstore.com/nema-17-stepper…
-
I've been struggling trying to find the bit of code inside Marlin that effects the speed of the X/Y movement from X0 Y0 to bed center when running G28. I have an ABL sensor installed and working fairl…
-
If you trigger the generate "part list" function in FreeCad, it reports lots of errors of files which no longer exist/renamed.
```
08:46:58 fcDocumentReader: file E:\source\index\pnp\cad\OTS\Make…
-
Hi,
I've question, because I'm working on new printer, but instead of using z-motors with integrated trapezoidal screw, I want to use normal nema17 motor with coupler (leftovers from previous project…