-
**Describe the bug**
Revov.py is not downloaded/installed by the installation script via SSH. (Tried to run the installer a second time - no change)
I see the following error in /data/log/dbus-se…
-
Have installed the driver for bms comm in Raspberry Pi 4b running Venus OS 2.91 the from off grid garage video and your all work ok to start with until a lot alarms started showing in alarm log on…
-
### Describe the bug
Bluetooth connection to JKBMS is not working since the new latest version (1.0.20230531)
### How to reproduce
Steps to reproduce the behavior:
1. Reboot Venus OS under 3…
-
**Describe the bug**
When we have ESS activated and activated the feed in to grid of the surplus energy, if it is programmed that the limit of DCL charging current is for example 2 A above a SOC of…
-
### Describe the bug
After uprading to the latest release the battery stopps charging at ~55,12 v but the end voltage should be 55,2 v.
So the following problem w…
-
1.: Thank you for this very helpful driver!
**Describe the bug**
Installing this driver destroys a already installed one.
**To Reproduce**
Steps to reproduce the behavior:
1. working [dbus-mq…
-
**VenusOS (please complete the following information):**
- Device type: [e.g. VenusGX EasySolar-II GX]
- Firmware Version [e.g. 292]
after install
root@EasySolar-IIXXXXXXXXXXXXX:~# sh install…
-
I believe the newer generation has this option to keep allowing loads when the temperature drops below a set value. For me, having the 2nd generation BMS, it always requires me to set the temperature …
-
Thank you for the great tool. Exactly what I need.
I have a working keep alive rule (DSL rule)
`val actions = getActions("mqtt", "mqtt:broker:VenusOS")
actions.publishMQTT("R/xxxxxxxx/k…