-
This is a list of issues discovered during Copter and Rover 4.4 testing. The older [4.3 issues list can be found here](https://github.com/ArduPilot/ardupilot/issues/21711).
Reports requiring inves…
-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
#### Issue details
Sorry if it has already been reported but I could not find a related issue : the latest Mission Planner version (1.3.58 was OK, 1.3.62 is not OK) sometimes does not seem to evoke a…
-
Actual CRSF implementations don't have a packet type for RPM data. This is needed for various other models than copters.
-
## Bug report
**Issue details**
If you mission starts with a NAV_WAYPOINT command and you enter auto before the vehicle has set its origin then the vehicle will immediately skip to the second wa…
-
```
Photographers like to have an open front view (AOV). Even if a 14*V is used,
frame width and length can make significant control differences. For example,
a narrow 14*V will have higher differ…
-
```
Photographers like to have an open front view (AOV). Even if a 14*V is used,
frame width and length can make significant control differences. For example,
a narrow 14*V will have higher differ…
-
```
Photographers like to have an open front view (AOV). Even if a 14*V is used,
frame width and length can make significant control differences. For example,
a narrow 14*V will have higher differ…
-
After first thinking these ESCs (https://www.emaxmodel.com/esc/simonk-series/emax-simon-series-30a-for-muti-copter.html) would not work with BLHeli (since they are not listed in the PDF), I got in con…