-
1) FC working on 1.9.0 CF with frsky x4R reciver with SBUS on UART3.
2) FC upgraded to 1.10.0 CF , FC manually configured and when arming FC . The FC lockup with a continuous beep tone sound and a con…
-
Thanks for putting this up to date page and your wiki page explaining how to install the firmware.
However, I've found nothing on how to connect the LRS JR module to the Taranis.
I have the DTF-UHF …
-
request for ibus telemetry support and/or transfer of code from https://github.com/unitware/cleanflight/tree/ibus-telemetry to betaflight 3.xx
original issue from cleanflight https://github.com/clean…
-
@kh4,
I found a small bug in SBUS input code.
Frame size should be 25 bytes ( frameIndex < 24).
Here are the relevant lines of code:
https://github.com/openLRSng/openLRSng/blob/master/TX.h#L535
http…
csurf updated
7 years ago
-
# Description of the issue:
I have 2 Azure IoT Hub nodes, 1 per node-red tab. The intention is to write to these using 2 different connection strings (i.e. represented as 2 different devices).
…
-
Taranis uses D16 with 8 channels as default and Horus uses D16 with 16 channel as default. Most user will probably leave as on the default number.
The difference between these two is that D16 with m…
-
Reported by Wayne: **we had a few reports from people. We did most all of our testing with the D4R-II in CPPM mode. Only ground checks with Sbus, so we failed to fully test it. Sorry!! The issues take…
-
I am having much trouble setting up RSSI on 1.6 OSD, set "show RSSI" and "use fc RSSI" and all that I'm getting is "0%" on the osd, also the frsky telemetry is working as I can get RSSI to display on…
-
It is not possible to set SerialRX provider with configurator. CLI works
-
I am unable to get the [Spektrum Quad Race Serial Receiver](http://www.spektrumrc.com/Products/Default.aspx?ProdID=SPM4648), which uses the RemoteRX protocol, to work with the Flight Controller (RevB1…