parallaxinc Flight-Controller issues

parallaxinc / Flight-Controller

Quadcopter Flight Controller

Other

24 stars 20 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

FIx WS2812 RGB-LED driver timings

#52 MatzElectronics closed 6 years ago
0
Validate gyro calibration

#51 JasonDorie closed 7 years ago
4
Add X-Axis Units to Sensor Graph

#50 RoboTechie opened 7 years ago
13
Investigate changing startup beeping

#49 MatzElectronics closed 7 years ago
3
Remote RX not functioning

#48 RoboTechie closed 7 years ago
20
GS Voltage Alarm hover text

#47 RoboTechie closed 7 years ago
1
Set "Audible Low Voltage Alarm" to disabled by default

#46 RoboTechie closed 7 years ago
1
Laser Rangefinder Altitude Hold Tuning

#45 RoboTechie closed 7 years ago
1
Compass calibration.

#44 MatzElectronics closed 7 years ago
8
Un-fix altitude data outputs from y-axis

#43 RoboTechie closed 7 years ago
1
Throttle change limiting

#42 MatzElectronics opened 7 years ago
1
Mac Ground Station Versioning and Telemetry

#41 jrleeman closed 7 years ago
3
Telemetry Lockups

#40 jrleeman opened 7 years ago
49
Add all/none to checkboxes in GS sensors tab

#39 MatzElectronics closed 7 years ago
2
Bidirectional data link between FC and GS

#38 MatzElectronics opened 7 years ago
2
Additional sensor integration?

#37 MatzElectronics opened 7 years ago
0
Slow flight loop

#36 MatzElectronics closed 7 years ago
3
Improve radio calibration

#35 MatzElectronics closed 7 years ago
2
GPS waypointing

#34 MatzElectronics opened 7 years ago
0
GPS position hold and return to home

#33 MatzElectronics opened 7 years ago
2
Serial command set

#32 MatzElectronics opened 7 years ago
4
File output of recorded sensor data

#31 MatzElectronics opened 7 years ago
9
Throttle high warning when USB connected to GS

#30 MatzElectronics opened 7 years ago
0
Altitude limiting

#29 MatzElectronics opened 7 years ago
0
Groundstation accelerometer calibration self-check

#28 MatzElectronics opened 7 years ago
1
Heading hold

#27 MatzElectronics closed 7 years ago
2
Collision Detection

#26 MatzElectronics opened 7 years ago
0
Auto-landing

#25 MatzElectronics opened 7 years ago
1
Firmware expo on channels 2, 3, 4

#24 MatzElectronics closed 7 years ago
10
Improve telemetry communications

#23 MatzElectronics closed 7 years ago
6
Determine which #defines to move to preferences

#22 MatzElectronics opened 7 years ago
0
In-depth PID research and tuning

#21 MatzElectronics opened 7 years ago
6
Descent limiting in stability and assisted modes

#20 MatzElectronics opened 7 years ago
2
Add hexacopter type to groundstation

#19 MatzElectronics opened 7 years ago
12
Add hexacopter type to firmware

#18 MatzElectronics opened 7 years ago
0
Merge pull request #1 from parallaxinc/master

#17 MatzElectronics closed 7 years ago
0
Altitude hold minor update

#16 MatzElectronics closed 7 years ago
0
Update GS throttle calibration user prompts

#15 MatzElectronics closed 7 years ago
0
Ground height and idle timeout improvements

#14 MatzElectronics closed 7 years ago
0
Altitude Hold with Laser Rangefinder Feedback Loop

#13 RoboTechie closed 7 years ago
1
GroundStation display issues with Windows 10

#12 RoboTechie closed 7 years ago
12
"Remote RX" Receiver Type not functional

#11 RoboTechie closed 7 years ago
4
Add an idle timeout

#10 MatzElectronics closed 7 years ago
0
Add an idle timeout

#9 MatzElectronics closed 7 years ago
0
Correct PI constant

#8 MatzElectronics closed 8 years ago
1
Corrected version number in the comments

#7 MatzElectronics closed 8 years ago
1
Filename cases are wrong for Firmware-C

#6 electrodude closed 8 years ago
5
Add GitHub Releases to Travis

#5 bweir closed 8 years ago
0
Add alpha channel to icon.

#4 bweir closed 8 years ago
0
Fix .travis.yml paths; delete exes

#3 bweir closed 8 years ago
0