-
I need help with the setup
-
I'm about to buy the parts for a GBS-C build. I didn't know where to ask these questions so sorry if this is not the best place to do it.
I'm interested in using only YPbPr component for inputs (PS…
-
I want to make a controller for a si5351 signal generator, and have found a sketch which uses Rotary.h. I notice that Rotary.h is designed for a switch which makes 4 changes per click. I have bought…
g4oep updated
3 years ago
-
https://github.com/adafruit/Adafruit_Si5351_Library/blob/f0e1b4a4d7acdb29b26e11c23665e66e28f3fe2f/Adafruit_SI5351.cpp#L401
divider is limited to 3 < div < 901 while AN619 and AN1234 state a range o…
-
https://github.com/adafruit/Adafruit_CircuitPython_SI5351/blob/92cdb316da9892aa7df41b634e4379aebfb89bb7/adafruit_si5351.py#L309
divider is limited to 3 < divider < 901 while AN619 and AN1234 state …
-
Thanks for this interesting project. I always like simple designs.
When I built it, I noted the frequency was a lot higher than expected. Then I noted that the SI5351 is supposed to work on 3.3 Vo…
-
- Arduino board: Arduino pro micro
- Arduino IDE version 1.8.10
- List the steps to reproduce the problem below (if possible attach a sketch or
copy the sketch code in too):
1) Set up the fr…
sx107 updated
3 years ago
-
I've had some good luck with the GBS-C project thus far with both YPbPr and RGBHV via the DE-15 connector, but have yet to have any success with RGBS when using the appropriate header connected to a S…
ghost updated
3 years ago
-
2019-04-08-raspbian-stretch-lite 4.14.98-v7+
Upgrade required for mismatch headers when installing raspberrypi-kernel-headers
to 4.19.66-v7+
This is the only Rpi3 OS on which I managed at lea…
-
ReadTheDocs is awesome for hosting reference docs based on GitHub code. However, we've been bad about ensuring its set up and formatted consistently. Ideally, they would all be like [this](https://tan…