-
I want to build one of these from scratch. Can you please provide details on programming; Tang and ESP32.
If there's already instructions then they are not logically named (ie 'Tang source') and w…
-
Hello. This project seemed to build ok but when I run it I just get a flashing green cursor and nothing else.
Keyboard, monitor and Tang Nano 9k all work perfectly with your VIC-20 project so does…
-
Is there a button combo to return back to the Game List? If not can there be one added so that you do not have to power the tango on and off. Can the menu also cycle through the game list pages faste…
-
Hi. I'm struggling to fix an issue I'm having with the published usb2uartjtag code.
I have a Tang Nano 1k, with a BL702 on board. I desoldered both the Bl702 and the GW1NZ FPGA, and transfered them…
-
Hi there!
I'm trying to boot with a Linux image created locally on a tang nano 20k, but I'm encountering an error that says "[LITEX-TERM] Got unexpected response from device 'b'E'" and the log stop…
-
I've just uploaded the MiSTeryNano filestream and TOS images (1.04UK and 2.06UK) to Tang Nano 20k via OpenFPGALoader. I've also programmed M0S dock with supplied firmware using Bouffalo Flash Cube. At…
-
### 详细叙述
X86 J4125四口主机，看到最近加入了r8157 5G USB有线网卡支持，迫不及待买来测试。
可以正常识别，显示为第五个网口eth4，并加入LAN。刚插入网线的前几秒可以用，但10秒左右就会…
-
It is a little unclear for me - if I just flash the atarist.fs, will I have a PS/2 KB/Mouse support without flashing anything to BL616?
-
Hi Olof,
Thanks for serv!
Yesterday I managed to get the serv core running with the hello world example, running 72Mhz using on a Tang Nano 9K and getting the Hello World @ 259200 baud.
Next s…
-
I'm trying to port your project to the GoWin FPGA GW1NR-LV9QN88PC6/I5, which is available on the cheap Tang Nano 9k development board.
I'm using RTL8211E as PHY, connected with RGMII.
I've run you p…