-
Hi . I wired everything like shown up but get TMC Connection Error in Display. Checked via Pronter 3 TMC2008 get a Connection But the 4. Has bad Response All to low. Can sw Help pls . I used BT…
-
^
src/module/temperature.cpp:2682:39: warning: ISO C++ forbids converting a string constant to ‘char*’ [-Wwrite-strings]
src/module/temperature.cpp:2685:38: wa…
-
-
To work precisely, closed loops systems are the solution. But GRBL don't have support for it yet.
Two solutions are possible.
`1: add encoder to each stepper motor, and feed the encoder signals to…
-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
I made a post in the main branch of [Marlin](https://github.com/MarlinFirmware/Marlin/issues/22996) & another user [here](https://github.com/bigtreetech/SKR-2/issues/96) has a similar issue.
What I…
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
**Your question or details you need. Please describe.**
I'm having issue working this configuration
#define SERIAL_PORT -1 #define SERIAL_PORT_2 1
I'm using this guide to connect MAX31865 in soft…
-
Hi! Diffrent mode setting pin state on PCB & manual than in datasheet.
-
I try to send a file (a g-code) using web ui, but it is not able to write sd card (trying with differents sd card)....transfert is shown completed (100%), but no files are on the media, althought I ca…