-
Seems to be a problem with the spi interface.
Arduino IDE Version 2.0.3.
After upload a sketch I get this output log:
_ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x7 (TG0WDT_SYS_RST),boot…
-
[System Information Original](https://gist.github.com/Goofybud16/3bdc6ed7d3ffe49b5b2c9ff039f5f8c4)
[System Information - Updated Jan 27, 2019](https://gist.github.com/Goofybud16/3ae46844a6dff5597ab12…
-
### 详细叙述
X86 J4125四口主机,看到最近加入了r8157 5G USB有线网卡支持,迫不及待买来测试。
![image](https://github.com/user-attachments/assets/2751c43a-cbcf-4137-885e-896fded75f28)
可以正常识别,显示为第五个网口eth4,并加入LAN。刚插入网线的前几秒可以用,但10秒左右就会…
-
After uploading sketch 'CameraWebServer' to the ESP32-CAM using Arudino IDE, I try using the serial monitor to show the IP address of the ESP32, however It just continues to load infinitely with no er…
-
Up until now most of the testing and benchmarking has been done on the development machine. Each time I've tried to use e-g on real hardware I quickly discovered problems with performance and/or code …
-
**Describe the bug**
Using `cargo flash` to upload binary on Ai-Thinker NodeMCU Series ESP32-C3S Kit (ESP32C3-based MCU) through the built-in JTAG USB interface fails with `Error No flash memory cont…
-
paste your GPTs links below👇
-
**Describe the bug**
Grizzl-e Smart v2 does not work with the OCPP integration version 0.4.40
Firmware WiFi Module: GWM-07.013-03
Firmware Power Board: GCW-10.18-05.7
**To Reproduce**
U…
-
### Describe the issue you are experiencing
I'm running a HA Yellow with a BT/WiFi CM4.
After a non consistant uptime the internal Bluetooth adapter is stopping to work and the integrations fail.
6…
ghost updated
1 month ago
-
I couldn‘t find any comments regarding the Plus 2PM, is there any news regarding this device?