-
I tested the library with a Cypress FM24V10 and the device is not recognized. The debug output reports "Chip not found".
I made sure the chip is working, by talking to it through the Wire library (…
-
Hello!
Nice job, congradulations!
I have one issue on the ESP8266, I receive only 32 chars..
----
Debug
----
ProductID 0x510
Density code 0x5
Density 256K
Device identfied automatically
.…
-
Please would you consider adding this to the Arduino libraries.
https://github.com/pholmes2012/Simple_FRAM_FileSystem
Regards,
Paul Holmes.
-
With master, after reflashing the firmware with APM planner, when the pixhawk soft reboots it fails to mount the SD card with the following output on the console:
```
�[boot] Initialized SPI port 1 (…
-
Discussion for this issue started in #4429
with samples/drivers/i2c_fujitsu_fram adapted to use I2C_1 as I2C_DEV or with a sample app using i2c_burst_write16 function there's the following issue.
…
-
This is a note here so it gets added to the 1.0 milestone. The discussion has largely happened on the mailing list or on the calls. A future PR will include more details about what changes the new dri…
-
**_Reported by Anas Nashif:_**
Since we moved to I2C drivers from QMSI the FRAM sample stopped working, the sample hangs while reading the data from the FRAM module. Bisecting leads to commit:
a7d…
-
**_Reported by Anas Nashif:_**
Since we moved to I2C drivers from QMSI the FRAM sample stopped working, the sample hangs while reading the data from the FRAM module. Bisecting leads to commit:
a7d…
-
Here are the details:
```
PS C:\> mbed import mbed-os-example-blinky
[mbed] Importing program "bed-os-example-blinky" from "https://github.com/ARMmbed/mbed-os-example-blinky" at latest revi
sion …
-
in drivers/i2c/i2c_ll_stm32_v2.c:
When an i2c-message prepends a restart condition (I2C_MSG_RESTART flag is set) in function **msg_init** auto end mode is beeing disabled for this message, but func…