-
Hey,
First of all thank you for your work! It is really awesome.
Is there a possibility to add the "party mode" feature?
(So that the landroid won't start if the party mode is activated)
Or is…
-
Very sporadically (every few hours or so), the path tracking is going wrong. If it happens, the mower has good GPS signal (fix), but is driving completely away from the planned path...
The problem …
-
There has been an binding request to support the Landroid S (2017) and even a working solution at issue #2468 from @Silencer80, but it has been removed because the used polling mode has been bothering…
GRORI updated
3 years ago
-
Hi
I would like to try it for my homemade ROS lawn mower but the installation is quite different from what i am used to and i would not like to create problems in my existing catkin_ws
Q1. Can t…
-
Hi again,
seams i got the similar error again (from 7.June):
`ERROR websocket error from callback : (invalid_grant) Failed to find token
`
i got this error at 6:38 before i open the web…
-
The offset of the linear drive makes the top plate on the hitch susceptible to sag. (Yeah, this might have been exacerbated by a low-speed encounter with an obstacle).
![image](https://user-images.…
-
Admittedly, my experience with a brush mower and a previous tractor may have set unrealistic expectations, but there are a couple areas on the mower that bend easily when hidden obstacles or ground le…
-
Dear hover-lover
After long, long time I do finish my little project. This is RC mower.
I use old mower, 2. hover-borads (10" and 8.5" wheel) old drone command, arduino nano for communication and m…
-
The body started in Fusion 360.
https://github.com/steger123/Lawn-mower-robot/tree/master/Designs/01_Body
-
I would like to have collaborators for an open source project: Lawn Mower Robot (LMR)
Shall be less in weight, but if not HUB motor used, then transmission line getting complicated.