-
#### Description
When link local is enabled on interface that has global IPv6 configuration, link local neighbor is not learnt.
The check here returns false https://github.com/sonic-net/so…
-
**Description**
The `config portchannel member add` command doesn't check whether added interface is a vlan member.
Although such added port has not been added to portchannel, but if running confi…
-
#### Description
GCU Field validation for interface fields fec and speed is not properly done with as a result to result with not-allowed configuartion.
The check is applied in CLI command…
-
Greetings,
this issue exists on netflow mode only. sflow mode does not exhibit this behavior.
the pmacct config:
daemonize: false
promisc: true
plugin_buffer_size: 10240
plugin_pipe_siz…
acoul updated
7 years ago
-
# If you want to solve your issue please read following information below
First of all, please check following steps:
* Do you have latest FastNetMon version? If not, please upgrade to 1.1.3 versi…
-
#### Description
Telemetry container toggling
#### Steps to reproduce the issue:
1. configure the switch
2. config reload the switch
3. check containers
#### Describe the results you receive…
-
#### Description
I did NOT setup any ACL/ACE. But every VLAN can communicate with each other plus Ethernet0; except for one, in my case Vlan53. It was working 3 days ago, and then just stopped.
…
-
### Description
It should receive a packet whose source and destination IP addresses are both match to the twice NAT/NAPT confgiuration, and then twice NAT/NAPT are able to apply on the packets. In…
-
**Description**
In sonic 202012, we are observing that COPP TABLE entries are removed from APP_DB by https://github.com/Azure/sonic-utilities/blob/2a982a1fe084b334fb99c372d171273931a0851b/scripts/…
-
#### Description
Yang model for bgp-neighbor does not allow the use of subinterfaces for bgp neighbors. FRR allows this and the setup works as expected.
#### Steps to reproduce the issue:
1…