-
After applying the Hex X mix the BOOT_GRACE arming disable flag never goes away
No matter what settings I change, the error still occurs
```
# diff
# version
# Betaflight / STM32F405 (S40…
-
Hi,
I'm using the revoltosd firmware on my millivoltosd FC. I'm also using a spark32 4in1 with blheli32 and rxsr fport with access firmware.
It seems like telemetry is not working at all and th…
-
Hello Exoplayer team.
i used Exoplayer in my app.
i have a problem.
when i play video format .mkv or Matroska on mobile device and android box
video can't support Audio ac3 some device
i use…
-
大侠，
编译完成后启动dpvs，眼看着要起来了，最终系统重启了，journal系统日志无异常
kernel 3.10.0-327 + dpdk 16.07.2
nic: intel 82599 ixgbe
40c
配置文件默认，只去掉了dpdk1相关内容
完整的dpvs启动日志如下，请帮我看看吧
```
EAL: Detected 40 lcore(s)
EAL:…
-
HI, Since 4.0.0 jeti receiver dosent work on any rx UART. I have try many solution but nothing work ( i have try pinio_config = 1,1,1,1 and that doesnt work too ).
With old Firmware, work fine , I h…
-
I am unable to free resources in iNAV. For example I have the following resource:
B05: LED1 OUT
If I type:
resource LED1 OUT NONE
Then it simply lists out all the resources again as if I h…
-
**Hey googlers! Using F.Port on your FrSky receiver would probably be a better option if it supports it. Solder to the Uninverted SmartPort pad and then flash it to F.Port through your radio. It shoul…
-
Hi Mafel
You closed the last issue when your board worked - but my problems still persist
I flashed the local hex file as suggested and it was ok
I also repeated the set up settings in INAV jus…
-
Thanks magnusja for great library..!!! i have problem with kotlin version. but it work normally in java version 0.6.0, the problem started in 0.7.0 version.
#### Problem
unsupported PeripheralQual…
-
we need to document the new Hott telem support. Ralf Helbing will provide some images for it
I'll do a discuss post with basic info. Setup is pretty simple, just SERIALn_PROTOCOL=27 and SERIALn_OPTIO…