-
Newer HBAs with the MegaRaid Fury chip (PCI 0x1000,0x5f) are appearing now -- for example the Dell Perc H330 uses this controller. Apparently it behaves the same as the Invader part that we already h…
-
```
What steps will reproduce the problem?
1. Install two quad-port FC HBAs
2. Look in the HBA area of the TUI.
3. ?
What is the expected output? What do you see instead?
Only see six of my FC ports…
-
Intel would like to get many new attributes. Summary of discussion and comments gathered from http://www.open-mpi.org/community/lists/hwloc-devel/2014/09/4226.php
It's OK if some of them are only ava…
-
Hi there,
We are experiencing zfs send|receive deadlocks on two production servers with high load.
Both servers are running [Proxmox VE](http://proxmox.org/) 3.4 with **ZoL v0.6.3-1.2**, ZFS RAID-1 w…
-
I have a 60-disk JBOD, connected currently through two SF-8088 connectors, one per HBA card, to a separate IO controller on the HBA, eventually there will also be a crossover connector, but I'm short …
-
(Potentially a performance issue . Not tested)
I was looking through some documents not too long ago , one where someone did an in depth test of the effects of hyperthreading on linux systems.
http:…
-
starting hbase 0.94.26 failed on win7 using 1.0.4-rc,
[steps]
F:\next-suning-monitor\pinpoint\pinpoint-1.0.4-rc\quickstart\bin>prepare-hbase-win.cmd
覆盖 F:\next-suning-monitor\pinpoint\pinpoint-1.0.4-…
-
Using precise Pangolin : In kernel -20 my pools show up when doing a zpool status and survive a reboot.
From -21 onward to -24 , zpools are gone after every reboot.
##
How dangerous is it to import…
-
I have 4 HDDs in IBM M1015 card, I migrate from FREENAS to UBUNTU, so i mange to have the pool import at boot but won't be able to mount at boot. I have tried to set /etc/default/zfs ZFS_MOUNT='y' bu…
arryo updated
11 years ago