-
Following Situation
Plane was powered up for testing without radio powered up
Servo connected to PWM OUT
After a while I heard the gear of the servo got killed because the board tried to force the…
-
I've been trying to use MKS SERVO42_CAN with an ESP32 but no ideia why I'm getting no response back. It looks like the commands are making to MKS, but not sure whether or not it was sent correctly.
…
-
forgive my ignorance here.
When I try to compile the sketch for my ESP32 I get an error that Servo.h doesn't support the ESP32 architecture.
Does the Seeed Xiao ESP32-C3 not present as an ESP32 …
-
Smart bins are equipped with sensors that can detect the fill level of the bin. This information is often transmitted wirelessly over WiFI or Bluetooth, allowing waste management teams to optimize col…
-
The current `servo_jp` and `servo_cp` commands only use a position setpoint. Since these commands are often sent directly to a PID controller (low-level), it would make sense to also add a velocity s…
-
When a Servo Bot is considered a Household NPC or otherwise uncontrolled through Control Any Sim, their "Servo..." dialogue option will be unavailable. Hopefully this is something you are able to do s…
-
Hi i work a lot with servo motors and i have one that could be used as a wheelbase... but they are controlled with a DIR+/- pin and a PULSE+/- pin... can your code be adapted? or do i need to write al…
-
@thinkyhead, based on our discussions at ERRF, I thought I would open a FR for DC servo/encoder support. I know misan has ideas on how this could be approached.
-
I have a project that needs a replacement for the AX-12A servo. I would like to ask if the STS3215 has comparable accuracy in feedback and torque, and if it can replace the AX-12A. My project requires…
-
map servos to channels on boards - up to 6x4 = 24 - but we are actually limited to 8 PWM channels.