-
**Describe The Bug:**
The V2 contact sensors always report somewhere around half the battery level
**To Reproduce:**
I have the homebridge paired with Home Assistant. Motion V2's report the c…
-
Hello,
We have a radio receiving RTCM corrections from a base station.
It has a RS232 serial output.
We would like to connect this to the Aux port.
Which parameters do we need to configure in …
-
I built the system using the rockchip-rk3588-rock-5b configuration. I added #1 and flashed the image to eMMC using RKDevTool.
When attaching a HDMI cable the kernel starts and stops responding after …
-
Hi,
i'm having trouble getting the display to work, and while double checking I found the following:
on the schematic and in other bits of code, LEDA (backlight?) is assigned to pin 38
#define TF…
-
I have managed to get this running on my ESP32 C3 which has a RISC-V Processor.
I added a SD Card and wired it according to the pins listed below
Below is my hardware config file called esp32-c3.h
…
-
Sébastien just curious but with the vector instructions and optimisation of the esp32-s3 have you ever tried any benchmarks on the difference it could make?
Shame there isn't a esp32-s3-a1s maybe wit…
-
We have a very strange problem. We are uploading large (10M) files from an EC2 instance to an S3 bucket in the same region. We use `aws s3 cp` for the upload and instance roles for authentication.
If…
-
Nibe
Hi! First of all, thank you for the work you have done.
I have Novelan L12 Split air-water heatpump (https://www.novelan.at/start/produkte/luftwasser-waermepumpen-aussenaufstellung/detail…
-
[home-assistant.log](https://github.com/hultenvp/solis-sensor/files/9654178/home-assistant.log)
After Soliscloud was updated early this morning, there is no data coming through on the sensors. on …
-
Bonjour
Ce matin je rencontre un soucis.
Après un redémarrage de mon jeedom la zigate n'est plus détecté.
J'ai essayé avec un autre convertisseur TTL mais j'ai le même résultat.
Que puis je faire …