-
https://puppet.com/blog/using-puppet-strings-generate-great-documentation-puppet-modules/
fnoop updated
4 years ago
-
During the vehicle is running properly with transmitter, if I remove the cable between RcIN and receiver. All the input stay in the last value before disconnecting. Is it possible to detect this situ…
-
Page: http://ardupilot.org/rover/docs/follow-mode.html
It says: "The following parameters can be used to tune FlowHold’s performance:"
-
Hi @imfatant
Thanks for providing this guide, it's exactly what we need.
I have BeagleBone Blue, flashed it with the [image](https://rcn-ee.net/rootfs/bb.org/testing/2019-03-17/stretch-console/bone…
-
There are issues running latest stable ArduRover (3.5.1).
The [metadata file](https://github.com/mavlink/qgroundcontrol/blob/master/src/FirmwarePlugin/APM/APMParameterFactMetaData.Rover.3.5.xml) wa…
-
#### Issue details
i use a uwb device,4 beacons and 1 tag.
i set beacon position at the initiation of beacon:
`
set_beacon_position(0,Vector3f(0,0,2.1));
set_beacon_position(1,Vector3f(3.035,0.…
-
Hello,
I got into reading about interfacing a 2nd battery sensor with the Pixhawk.
This seems to be implemented, since the parameters are there: http://plane.ardupilot.com/wiki/arduplane-parameters/…
-
#### Issue details
When using gazebo sitl with rover, it seems to be an important slow down in sitl or micro disconnection
that make launch very slow. The behaviour can be more or less long (but le…
-
Hi,
While starting Sitl for APMrover2 with a world file in gazebo 9 , The rover starts moving in a specific direction even without setting up any script file. I'm only using the file, sim_vehicle.…
-
[Rangefinders (landing page)](http://ardupilot.org/plane/docs/common-rangefinder-landingpage.html) -
I use ArduRover v3.4.2 and pixhawk with RPLidar A2.
When I connect 5v and GND to telem1 the vo…