-
It was bought up on the facebook group that STEP files of the die castings for the Hermit Crab V2 etc were not yet available only step files of the boards. It was said that it would be bought up and r…
-
On the [Mini12864 documenation](https://docs.vorondesign.com/build/electrical/mini12864_klipper_guide.html), it tells you to remove certain components from the display board. In the case of BTT, it's …
-
Here features that will be covered by ESP3DLib 3.0 :
- Webui 2.1 3.0 support
- Move to SSDP asyncudp library
- Move ESP32 core to 2.0.2 / 2.0.3
- Move from SPIFFS to LittleFS
- AP mode setup re…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have an existing custom configuration for a machine that worked before https://github.com/M…
oliof updated
1 month ago
-
I'm totally new in this, i can't understand if i only have to plug the jumper for the uart and then use the drivers or if i have to weld a resistente somewere to wire correctly the uart mode. I watche…
-
I'm trying to work out how to install the BTT Relay V1.2 to be used on the SKR Mini E3 V1.2 board.
There doesn't seem to be any definition for setting which pin to use in the pins_BTT_SKR_MINI_E3_V…
-
Thanks for sharing. I'm trying to run your demos, however , there is no Onset plot window. How can I get onset window?
-
Hi All! I have troubles with my BTT 3.5 tft v3 and SKR 1/4T
in marlin mode i see SD insert and removed when i insert and remove SD card but see NO Media when i want to print from SD.
In BTT mode whe…
-
Attempting to use a touch screen with the cb1. They say to change the config.txt file which is never created on the current images. Adding it manually doesn't enable USB either.
support said:
H…
-
I just got my BTT Pi set up instead of Rpi. Works very well.
The display is heavily flickering and fading in and out.
Problem only exist on Klipperscreen, not in terminal/console.
https://github…