-
## Expected Behavior
I just updated from ELRS Configurator v1.5.9 to v1.6.0.
I'm trying to open local folder "ExpressLRS-2.5.2\src".
## Current Behavior
However, I cannot open old…
CCNUI updated
5 months ago
-
### SOC
ESP32
### Lora IC
SX1276
### Product Link
https://www.happymodel.cn/index.php/2021/02/19/expresslrs-module-es915tx-long-range-915mhz-transmitter-and-es915rx-receiver/
### Description
Th…
-
## Current Behavior
Using the Team Racing mode, I have so far set and "lost" models on the bench.
I have them setup to use AUX 5 (my 6 pos selector) and the proper position set to the quad. The…
-
Modern ExpressLRS RXes can invert sbus on their side, which means it should be usable directly on an atmega32! This also should enable the returning of telemetry data, which would be awesome.
-
## Current Behavior
When a Radiomaster ER3C-i receiver (UNIFIED_ESP8285_2400_RX_3.3.0) is powered on, it produces invalid output (sporadic pulses and noise) on the line for about 240ms before valid…
-
### Describe the bug
While dropping Throttle to Zero my quadcopter continues to ascend. Blackbox logs show that Motors 3 and 2 are start at 45% while 4 and 1 are at 0% while Airmode attempts to hold…
-
SBUS work only on Ch.1 to Ch. 9 @ ELRS V3.4.1
With ELRS 3.4.0-**RC1** no problems!
- TX hardware: TX16S MK2
- RX hardware: HappyModel EPW6 2.4GHz PWM
- Handset model:
- EdgeTX: 2.10.0
- Expr…
-
## Current Behavior
When refreshing Lua, the bad/good number goes down, e.g. from 0/250 to 0/246. This is apparently only present on FM30 STM32 TXes which worked perfectly on 2.0.1.
## Steps to …
-
## Current Behavior
When viewing the ELRS Lua script in the tools section of my Radiomaster TX16S radio, the header bar at the top of the screen reports the incorrect name of the TX module installe…
-
In my opinion, flying a plane the barometer values Alt and VSpd are essential. Especially with a powered glider trying to do some thermal flying. Just learned, that the combination AP Plane, yaapu an…
ghost updated
7 months ago