-
Hello Olikraus,
after several seconds or some minutes the Arduino is stopping or maybe internally crashing.
Have an Arduino NANO Every with a DOG XL 240 Display connected with I2c. When I run
a l…
-
Hello Olikraus,
after several seconds or some minutes the Arduino is stopping or maybe internally crashing.
Have an Arduino NANO Every with a DOG XL 240 Display connected with I2c. When I run
a lit…
-
This issue has been partly raised in [this thread](https://www.avrfreaks.net/forum/attiny-202402-was-simulator-issue-now-bad-device-id), independently of jtag2updi and I am now experiencing it combine…
-
I'm trying to use serial on a 3216 clocked a 1MHZ internal running at 3.3V. I get only garbage on serial regardless of the baud rate unless I run at 20 MHZ (which is of course not recommended at 3.3V)…
-
In 2.2.2 and 2.2.3, platform.txt is missing a critical change to enable uploads via just a serial adapter (pyupdi-style upload)
```
# board manager version
#tools.pymcuprog.cmd={runtime.tools.pyt…
-
Hi,
... I think there is a typo in the parts.h file. The ending 9 at the end is missing in the last line. 809 ... 4809.
https://github.com/SpenceKonde/jtag2updi/blob/master/parts.h
best regards
-
Hello,
I can’t compile that code which you can find in the attachment. Any suggestions? Please rename the File to .ino..
Also in the attachment is the full error Log.
[BasicUsage Kopie.ino.…
-
Logic will be trivial, analog comp. looks easy too.
DxCore library would be a good place to put the autotune related calls,
-
Hi,
I recently purchased two of your "Arduino Nano HV UPDI Programmer" from your Tindie shop and just got them in the mail and have been trying to get them up and working. I started by just trying …
-
Hello,
your board package is great. I have two questions.
Where did you get the values for the additional BOD Level Fuses settings? It's not in the manual. :-)
Why do you set the bit 2 in fu…