-
I recently bought a Taranis QX7 and after setting it up I’m having an issue I hope you can help me with. I fly quadcopters and went to set up a model profile and in bthe outputs page I went to set m…
-
I was looking into your glissinator code as I need to do something similar but not quite. And I'd like to roll it into my thing so there is less wiring.
I got some odd behaviour when I was torutre …
-
Encountering an issue on 3.2.x maintenance branch where once my quadcopters GPS sensor acquires a lock the RX_SET beeper wont make any sound. It works fine before the GPS lock is acquired and then onc…
-
TBH no one in the lab understands cameras, and therefore we generally don't do anything about problems with accurate color representation in our images, white balance, exposure, and all of that. This …
-
Hi Kris.
First of all, thank you very much for this library, it has really helped me.
I have a problem with my yaw angle. When the pitch or roll angle reach 90º or -90º , the yaw angle changes ta…
-
I am using BF on my 2 flip32 board in 2 quadcopters on few last versions upto 2.1.6 without problems
I wanted to reuse my CC3D board on a tricopter and I have asked you to fix that first https://gith…
-
Following is the thread that I've posted in RCGroups https://www.rcgroups.com/forums/showthread.php?2912273-Matek-Flight-Controller-F405-AIO/page7#post37981481.
As asked, now filing an issue as a …
-
Hello can you make panelized gerber file of pagoda 2 rev B with 16 pagodas in one panel 10x10cm pcb, please? :)
-
Last days I updated I two of my 110mm brushed quadcopters a few times with latest master for flight testing. It is and AlienFlight F4 and a F7 brushed board. An 3.2 build from the first half of the mo…
MJ666 updated
7 years ago
-
#### Issue details
I calibrated the Quadplane ESCs first to go from 980 to 2000.
If I check the calibration by setting Q_ESC_CAL to 1 and mode to QSTABILIZE I can confirm the calibration is fine. I …