-
ESC telemetry is on TX6 by default. But it does not work, if I connect it to TX6.
If I connect it on Revolt V5 OSD board to RX6, then it works, which is also normal by my understanding from the other…
-
Hello.
Is it possible to use flit10 telemetry at the same time with receiver on same UART port?
I just connect receiver TX (ibus) to fc RX6 and receiver RX(telemetry) to fc TX6 (4 wires).
And as I …
-
We have a VCF file that is about 200MB in size and it has a huge list of germplasm in the header. After submitting the job, the website breaks with a 'Request-URI Too Long' Error. It turned out the wh…
-
We currently have ADR support for the EU region, but it shouldn't be too hard to implement this for the other (US, AU, AS, KR) regions as well. @gomezjdaniel: please work with @tftelkamp to implement …
-
`OMNIBUSF4` ([HGLRC stack](https://www.hglrc.com/collections/flight-controller/products/hglrc-xjb-f44032-f4-flight-control-d-shot-version-40a-bl32_40a-3-5s-esc-blheli_32)) is unusable with Betaflight …
-
Hi there!!!
Today i received my new GPS that i would like to install on my flying Wing controlled by a Omnibus F4 V3 (https://www.banggood.com/Eachine-Wizard-X220S-FPV-Racer-Customized-Version-Omnibu…
-
Hey all,
I'm raising a concern with BF 3.3.X smart audio functionality.
Since flashing my FC with the latest firmware, 3.3.3, my smart audio has stopped working.
It wont let me access the men…
-
We have a couple new storage servers with twin 25GE interfaces from Mellanox.
```
leinen@zhdk0192:~$ dmesg | grep -i connectx
[ 17.140033] systemd[1]: Found device MT27710 Family [ConnectX-4 Lx…
-
ok, I found out the FPort is working on Omnibus F4 Pro v2 + softserial on CH5 and CH6 pad + R9 mini (without the inverter) + iNav 2.0.0RC4 (check here https://github.com/iNavFlight/inav/issues/3344…
-
So have issue with Airbot Omnibus F4 V6 LEDs.
Flashed OMNIBUSF4FW firmware, but couldn't use LED or TX1 (S/A) for smart audio. SA didn't work on TX2 as well
As SA is primary, flashed with OMNIBUSF4S…