-
Hi RavenSystem can you perhaps do an enhancement whereby GPIO 14 can be exposed to the home app as a motion sensor. Motion sensors are currently available that work with HomeKit. Basically it’s a simp…
-
Experiment and write up
e.g. https://tactile-electronics.tumblr.com/post/112332704495/textile-sensors-circular-knit-stretch-sensor-a - measure bicep curls, or knee bends Light sensor on the microbi…
-
Hi,
I have been using Tasmota 6.2.0 and its working great... But when i interface JSN-SR04T it works great until in between it switch from 82CM to Directly 92CM or 62CM randomely inbetween. I know …
-
I'm looking at example 5, and I have a question about how do I get the real sensor delay instead a simulated one like in this example?
-
would really love to be able to use hcsr04 ultrasonic sensor to be able to tell if garage door open/closed. any chance support for this sensor might be coming?
-
Write optimal_direction() function into sensors.py library.
1. Center servo
2. Pan servo left
3. Check front distance and return left_distance()
4. Pan servo right
5. Check right distance and …
-
Hi,
i have 2 wemos d1 mini with a HC sr04 and the other one with a US 100.
Including firmware mega-20180606 the sensors reports fine.
All later firmwares says no reading.
Do you have an idea w…
-
Hello evrybody,
Many new FC boards does not have 8 motor output pins.
So I'm searching sonar with I2C output.
And I'm found this one: [http://bit.ly/2ACnhzw]
But this module designed for PIXHAWK o…
-
Hi,
I am trying to get PX4FLOW working on my Intel Aero RTF Drone, using the PX4FLOW board and a LeddarOne rangefinder. I have the LeddarOne **and** the PX4FLOW board plugged into the Telemetry port …
-
Hi Guys,
Any plans for ultrasonic distance measurement sensors? I have about 4 application I could use it for now if it ran on Tasmota. I'm currently playing with this one at the moment "Jsn-sr04…