-
Hello i'm trying to decode a rf control's code but the receivedemo_simple or advanced doesnt show anything i think the receiver is working the transmitter is working is too (since i can use it on norm…
-
Hi, I am using an attiny85 as remote and a nodemcu as a receiver and flashed the example sketches on both and I have corrected the pin numbers.
Only the problem is, this works:
![0a0e5400-1b16-42a…
Tvde1 updated
4 years ago
-
Hi,
When I transmit an ON command with RFXmngr with random ID/unit my IT(ProMax) plug switches on correctly when in learning mode. After this I'm able to switch on/off using RFXmngr. However, when I …
-
Hi,
I am using the SRX882 receiver together with a raspberry pi 4. The CS pin is connected to vcc.
I have three different remote controls to turn on/off three sets of remote sockets. All three opera…
-
Hi Chester4444
Thank you for developing this great Integration to Kamstrup Multical21.
Looking forward to implement you updated, special the CRC check is great as the old implementation were a littl…
dkcsn updated
9 months ago
-
Originally reported by: **0xFelix (Bitbucket: [0xFelix](https://bitbucket.org/0xFelix), GitHub: [0xFelix](https://github.com/0xFelix))**
----------------------------------------
As discussed in your…
-
Are there any law restrictions for using this [RF transmitter](http://ninjablocks.com/blogs/how-to/7501042-adding-rf-433mhz-to-your-arduino) in europe?
-
I've been trying a lot of different connections and codes, but even if i have connected right the cc1101 to my esp32, the code doesnt seem to work.
I mean, in the serial monitor, it says "Connection …
-
Hi,
I got this wind sensor as present. Is there a chance to make it work with Homey?
https://www.tfa-dostmann.de/en/product/wind-transmitter-30-3801/
I am not able to locate it on Homey. Con…
-
Is possible integrate with meshtastic no licence network?
https://meshtastic.org/
or https://reticulum.network/index_pl.html
srem1 updated
3 months ago