-
hi I'm trying to use uart but with bad result on the USART3.
i have the timeout of the signal with the classic beep.
I tried different pin for tx and rx on Arduino nano with the correct value on hov…
-
I have hoverboard motors driving a golf push cart controlled remotely with an Arduino Pro Mini 3.3v through UART. I have the mode set to speed. The Arduino sends a command every 40msec over the buil…
-
Hello,
I was using the Arduino-FOC with the STM32 which worked nicely.
Now I set it up with an ESP32 Wrover (board version 1.0.4), trying both the current master-branch and dev-branch (31.08.20) and…
-
What are these mistakes? How to solve this problem? thank you!
e:\Program Files (x86)\Arduino\libraries\Arduino-FOC-v.1.5.0\src\FOCutils.cpp:108:55: error: 'MCPWM_SELECT_SYNC_INT0' was not declar…
-
I found this board integrate 3-current resistor and with F103 processor.
Can we use it to study simplefoc?
-
Hi,
Is it possible to use the library with SoftwareSerial port ?
I did a quick test, it does not compile (didn't dive further).
Could you point out what need to be done or could you add this co…
-
Hello, is there a way of programming a reset button into the board? Like pressing the on button for 10 sec and the code runs from the beggining again. My project only works one time after I flash the …
farev updated
3 years ago
-
Hello,
Does this firmware work with dual based GD32F130xx boards?
Like these at this one: https://github.com/flo199213/Hoverboard-Firmware-Hack-Gen2
Thanks!
ikout updated
3 years ago
-
Referring to:
https://github.com/simplefoc/Arduino-FOC/blob/master/library.properties
The url is
```
url=http://askuric.github.io/Arduino-FOC
```
I think you've moved the repo to simplefoc organ…
-
Hello. I want to make a firmware VARIANT_PWM using - RoboDurden's online compiler.
Please tell me which lines need to be uncommented?
I've commented out the VARIANT_PWM string, but it doesn't work,…
vfear updated
3 years ago