-
Problem description:
Erratic robot motion before immediate faulting when switching from default STC to Cartesian Controller
Software versions:
Commit: dc803377752bcbc175004a549485ef011ec4a952
O…
-
Hi!
Could you please put the information about supported architectures to the documentation please? E.e. about supported architectures for different operating systems, some specific requirements to…
-
Hi there,
What are the hardware requirements to run this on a local machine?
-
First off, thank you for your work this is an awesome project.
I ask mostly out of curiosity, but would it be possible to support hardware PWM using the `/dev/gpiochip` interface?
Also, do you k…
-
We want to use 3D printing to make cases for the boards and sensors. These cases should be as generic as possible. For example, the main controller case should support both Raspberry Pi and Orange Pi.
ATATC updated
1 month ago
-
-
- `customer-pingali`: TODO Gong snippet
- `prospect-ramzel`: TODO Gong snippet
---
-
Could you tell me your hardware configuration, especially the graphics card?
-
This ticket is about setting up testing on hardware. Below there is a list of things to setup in order to start testing:
1. LAVA lab
This is already setup. We host qcm6490 (qcs6490) and it can run…
-
Hi,
It appears this is not implemented. Are there plans to do so? Having to be connected to my whole system to test changes really slows down development.
I use the dummy_hardware feature in the…