-
I installed the camera_ros from source. On my attempts to run the node using ros2 jazzy, I am using a YUYV pixel format with a pi camera 3. Every resolution I try ends up with the node terminating af…
-
I am trying to run a single MCC 128 board with a BananaPi M2 Zero running Armbian 23.05.0-trunk Bookworm.
It seems like some aspects of the installation process are specific to Rasbian and I was …
-
Hello,
I was modifying the `/etc/network/interfaces`, in particular the wireless connections part. However, now I cannot detect neither the starterkit access point (from the list of WiFi networks ava…
-
I have performed the steps to build the yocto project for rel3.2.1 but I get the error when running repo sync:
```
repo sync
remote: Enumerating objects: 1372, done.
remote: Counting objects: 100%…
-
Our setup is a SOEM master on a devboard with EtherCat connected to two different slaves.
We use the simple_test.c from the SOEM test/linux directory and modified it to measure some timing behaviour.…
-
Hello,
Could you please elaborate on the access point setup of the starter kit? As far as I understand, the IMX PC is running some form of DHCP server to provide the IPs for devices connected. Howev…
-
Attempting to start an open-balena instance results in open-balena-api having hundreds of errors during startup that like:
```
Failed to get device type build data for imx8mmebcrs08a1/2.103.3 Access…
-
@vraevsky this is super helpful. I'm trying to get it to work with hardknott and the `ucm-imx8m-plus`.
I'm running into a seg fault when I try to make the `imx-boot` image. Any ideas?
```
cst-t…
-
Tested based on commit: https://github.com/Freescale/meta-freescale/commit/29758cce6b676ecee9b654954bd4aa94f4b94d9e
When weston.service starts, the following error was observed:
```
[16:09:50.5…
-
Relative timestamps
![image](https://user-images.githubusercontent.com/106702474/1714…