-
I have been fighting a problem for quite some time and have tracked it down to the queue report and
status reports not working the same in all situations.
I like to step through my GCode programs, me…
-
mpox/mpoy/mpoz appear not to report the correct machine positions.
To reproduce:
1) Issue a G28.3 Z0 (to set the machine position of the z to zero)
2) Request an mpoz using the JSON interface. {mpo…
-
FB: 440.20
Give I'm at X=-1.00, in G90
I submit 'G1 F100 X0.01' I get a returned 'r', 'sr' and 'qr' reports.
I then resend 'G1 F100 X0.01' I get returned 'r' and 'sr' (no motion occurred, motors did n…
-
Units should be displayed correctly in the DRO
-
G28.3 is documented to set the absolute position of an axis (and set that axis to 'homed' status internally). G28.3 functions correctly when no work offsets are active. However, if an offset it activ…
-
In the process of testing the VU command changes and I can't get the engine to start without hanging. It gets to the info: Connecting to G2... most of the time and made it to info: Configuring G2 once…
-
To reproduce, open a serial connection to TinyG and send `;%g28.2 x0 y0 z0`
Expected behavior: nothing happens, it's a comment!
Observed behavior: homing sequence happens:
```
;%g28.2 x0 y0 z0
{"sr…
-
M2 is supposed to stop the program, and, in particular, it calls G92.1.
In practice, the output differs a bit.
Here is G92.1:
```
> {"sr":""}
{"r":{"sr":{"mpox":0.000,"mpoy":0.000,"mpoz":0.000,"mpoa…
-
This almost happens at random spots but as you can see here:
384907 [ResponseParser] INFO tgfx.ResponseParser - Got Line: {"sr":{"line":1485,"mpox":75.579,"mpoy":142.911,"momo":0}} from TinyG.
the …
ril3y updated
11 years ago
-
I have been trying to cut a 2d part with tgfx and two times in a row, the machine has stopped running midway through, with the following information on the terminal:
[+]User has entered text mode. T…