-
```
src/main/drivers/system_stm32f10x.c:77:#ifdef CC3D
src/main/drivers/timer.c:777:#ifdef CC3D
src/main/fc/fc_init.c:789:#ifdef CJMCU
src/main/io/gps.c:284:#if !defined(COLIBRI_RACE) || !defined(…
-
i want to learn and test this demo,but i donot find which stm32 chip is used in this demo? Can anyone help me?
-
STM32f10x hal使用ide编译可以正常运行,但是使用scons用gcc编译时,虽然可以正常编译,但是无法运行。
-
The beeper will not work. In the mode selection the beeper is enabled and when the proper switch is positioned it lines up under the beeper selection.
The board is EMAX SKYLINE32
The CLI says beeper…
-
bsp: stm32f10x , console 在 uart1~ uart3 都正常的。
bsp: stm32f10x_hal, console 在uart1, uart2 是正常的, 在uart3 上没有正常工作。 (没找到原因。)
-
搞了好几天没头绪,不明白ep_pool如何初始化,能否给个使用说明之类的,提示一下流程
-
The following is the current build error message:
`mkdir: cannot create directory 'BuildOutput/Debug/bin': No such file or directory
"../../Compilers/GCC5.4.1/bin/arm-none-eabi-ld.exe" -static --…
-
I've always had strange errors in bCNC when zeroing X, Y or Z axis or pressing the stop button several times in a row. The errors only happen if "Hard limits" are enabled ($21=1). After some debugging…
-
pi-star@h-pi-star(rw):scripts$ ls
build_fw.sh install_fw_custom.sh install_fw_hshat.sh install_fw_rpi.sh STM32F10X_Lib
install_buildtools.sh install_fw_duplex.sh install_fw_librek…
-
Currently we have a few possibilities of output channel mappings:
1) Multicopter w/o servos
2) Multicopter + servo outputs
3) Airplane
While 1 and 3 are straightforward - `multiPPM`, `multiPWM`, `air…