-
Hey Kris,
I have read in a lot of posts that the yaw tends to drift over time but this has not been an issue for me using your code, I have however noticed a slow drift upward in the altitude. I can…
-
Dear Mr. Kriswiner
Thanks for your project on MPU 9250, I could draw some support form it.
I interfaced MPU 9250 on the GY 9250 board to a PIC MCU through I2C protocol.
I wanted to read the WHO_AM_…
-
I'm trying to write some support routines to allow someone to specify the sensor type (from [ev3_sensor.h](http://in4lio.github.io/ev3dev-c/group__ev3__sensor.html)) and the port (`INPUT_1/2/3/4`) tha…
tcwan updated
6 years ago
-
TODO
-
I am using a Razor on a model aircraft, and find that in a tight turn, using the Euler angles, the yaw is not updated rapidly enough. I plotted Course over ground from the GPS vs Yaw from the Razor, …
-
Log Data using Array!
Edit*****
use EEPROM such as the 24LC256 at chapter 21 of tronixstuff.com tutorial
also use a real-time clock IC (such as the DS 1307)to track the duration
Edit 2 *****
why wou…
-
```python
Adafruit CircuitPython 6.0.0-rc.1 on 2020-11-03; Adafruit QT Py M0 with samd21e18
>>> import adafruit_bno055
Traceback (most recent call last):
File "", line 1, in
File "adafruit_b…
-
Use the data dictionary format in https://community.carloop.io/t/data-format-for-data-dictionaries-and-can-traces/74/3 to automatically decode CAN messages on the device.
-
In order to reach milestone 0.1 we need to be able to demonstrate single motor control based on sensor readings from the MPU-9250. The physical setup will be a lever attached to the desk via a pivot w…
-
### Branch
main branch https://mmdetection3d.readthedocs.io/en/latest/
### 📚 The doc issue
In your demo, config_path = '../config/detection/embodied-det3d_8xb1_embodiedscan-3d-284class-9dof-mlvl.p…