-
$ svd2rust --version
svd2rust 0.19.0 ( )
$ svd2rust -i ESP32C3.xml
[ERROR svd2rust] In device `ESP32C3`
Caused by:
0: In peripheral `IO`
1: In cluster `Configure Reg…
-
why did you work so hard to remove gd32vf103 reference in the documentation ?
It's pretty clear the riscV mcu is this one on your SOC.
-
If you send multiple writes back-to-back, the first write succeeds but the subsequent writes do not block or return errors.
Further writes succeed if you manually insert delays between calls to try_w…
-
**Describe the bug**
Trying to using cargo flash with the current probe-rs master not longer works with a jlink and esp32c3, v0.11.0 works fine.
**Stacktrace**
```rust
Error 0: Something during …
-
Is this file available somewhere? Or how should development on Linux work otherwise?
```
# make CONFIG_CHIP_NAME=BL602 CONFIG_LINK_ROM=1 -j flash
****** Please SET BL60X_SDK_PATH ******
****** T…
-
Hi,
I am starting a new project that uses the ATMEL samv71-xult board under Nuttx. To test my hardware I need to access the PIO lines on the EXT1 and EXT2 expansion ports, this sounds easy. I went …
-
The reset functions in the ROM have a bug where they do not first clear the swrst bit prior to writing it. This means that if you issue a `GLB_SW_System_Reset` twice the second one will hang in the …
-
Hi,
I've searched high and low and can't seem to find any info on how to do an OTA update on the BL602. I see that tcp port 3333 is used but don't see any applications that use that port to send…
-
https://github.com/bouffalolab/bl_iot_sdk/blob/3a6fef76a20409cd04227d81f4b4c27b054490f9/components/hal_drv/bl602_hal/hal_pwm.c#L475
文档: https://github.com/bouffalolab/bl_docs/tree/main/BL602_RM/zh_…
-
Several articles are completely empty except for a main header.
This leads to significant bloat in the documentation with titles that do not contain any useful information anyway.
One example is…