-
-
Add a slide switch to allow multiple footswitch devices in the same chain. Mechanical questions should be considered when choosing the switch and positioning it in the pcb.
Bellow are some reference…
odurc updated
9 years ago
-
My main issue with the current Cycle architecture is the way drivers are actually globally scoped:
- `DOM.select('.field')` looks for an element in the _whole_ DOM subtree managed by Cycle
- `HTTP` is…
-
# Preface
It started when I got a few ideas where LMMS could better use so called "master keyboards" or musical keyboards in general. The idea is as always - to save user's time and do stuff for him,…
-
Check if there is at least one ADC pin available, if not, swapping of GPIOs pins should be considered. This pin reservation will make easy a (probably) future expression pedal / footswitch extensor in…
odurc updated
9 years ago
-
Ideally we should host it in a new github repository such as https://github.com/portalmod/mod-hw-expression-pedal-firmware
-
I searched with no results, so forgive me if this has been brought up. I also didn't see it on the roadmap.
I'm aware that automation recording has now been implemented and will be in v1.1 .. and that…
artao updated
9 years ago
-
Ideally we should host it in a new github repository such as https://github.com/portalmod/mod-hw-footswitch-firmware
But there's a chance the codebase of the firmware for this device can be shared wi…
-
The CvPcb program (part of the KiCAD suite) helps the user to map components from a schematic to footprints that will be used on the actual PCB. This mapping between components and footprints is saved…
-
The new firmware is super nice :) One feature I'm missing from the old one is to lock chords in unison mode via footswitch. Old operation worked as follows:
1) switch on Unison
2) hold down a cho…