-
Hello, the device is possible to connect to ZHA integration
but then it is not really recognized
the device is bought from here:
https://de.aliexpress.com/item/1005004294995498.html?spm=a2g0o.pro…
-
We need better motion profiling.
This is an epic placeholder story until we can break it into smaller stories.
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
Hey, I was working on road slam using Point LIO. My slam was functioning well on an Ouster lidar with only lidar data before performing RANSAC, and this was my configuration.
common:
lid_top…
-
## Description
Electrical has impelmented 6 Temperature sensors on board. The goal is to measure ambient temperature inside of the Freya ASV with 3 sensors. At the same time use other 3 sensors and at…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
Hi,
Thanks for your sharing.
1. For impedance:
`_step() -> _step_continuous() -> _setup_action() -> _do_simulation()`
In _setup_action(), it just setup gripper part action, rescale and set gravi…