-
I'm looking to rebuild the Test/rp_remote_acquire/ddrdump.bit firmware. Where can I get a hold of this code?
Thanks!
-
Description of the setup:
Device: 125-14-Z7020-LN
SD card image: red-pitaya-alpine-3.14-armv7-20220322
Application: pulsed_nmr
Description of the problem:
### Description of the problem:
I…
-
**Hi, I am trying to catch the real-time GPS L1 signal using RTL SDR as FrontEnd
I used the config file:**
[https://github.com/gnss-sdr/gnss-sdr/blob/next/conf/gnss-sdr_GPS_L1_rtlsdr_realtime.conf ]…
-
GPS PPS signal (DIO3_N) appears to be broken. Can I change something in the code so I can use another GPIO pin instead ?
On my original STEMlab 125-14 the PPS input is reported as having no signal (N…
-
There are markers of a merge conflict in the code:
* https://github.com/RedPitaya/RedPitaya-FPGA/blob/07f102008aae01c49895ec92adfe467cd1f20288/prj/Examples/make_project.tcl#L8
* https://github.com/…
-
Is there any way of using the MMI to turn on and off a Receive Pre-amp?
Setup is Pi4 with Red-Pitaya set in ALEX mode which shows the 4 Attenuator modes, which works fine, but the Pre-amp enable is n…
-
Hello Pavel!
As i understand correctly the main difference between 16bit Red Pitaya and TRX-DUO (chinese clone of 16 bit Red Pitaya, but with 125MHz clock and maybe some other differences) is in di…
-
Hello
Can anyone tell me where just the correction of signal value in "pure signal" procedure is done : in Red Pitaya fpga hardware or in PC software. I know generally block diagram for "pure s…
-
Would it be possible to feed dumphfdl with various ZMQ feeds? I suppose even if it could read one ZMQ feed a user could just open it multiple times.
I saw on Twitter someone asked about using a Red…
-
Hi!
As the title states, I am unsure with what project base I should start.
There is quite a palette of different choices:
http://redpitaya.readthedocs.io/en/latest/fpga/fpga.html#fpga-sub-proj…