-
I figured I'd start a new comment to discuss the second gen sensorboard. My proposed hardware at this point is:
1) LPS22HH (replaces MS5611). I really don't know which is better, but the LPS22HH …
hpmax updated
4 months ago
-
Hi. Tried to get worked on ESP-WROOM-32 but got sync error. I have several Casio RC watches, I can get time with the real Germany signal but got an error with emulated. The watches shows high receivin…
-
I cant keep the Engine running. I was seeing I2C errors and I have swapped and tested cables. Tried a cable without the PWM cable at all. Below is the log with excessive logging.
Tested on bot…
-
When I2C is having errors, an attempt is made to restart the transmitter:
```
2022-10-23 09:24:10,654:root:ERROR:read_i2c_block_data error
Traceback (most recent call last):
File "/home/fpp/me…
-
Hello,
I am looking for how to contribute to the RTL_433 project. I recently purchased 2 sets of TPMS sensors to be installed in my and my wife's vehicle but neither of them are detected after inst…
-
Hi,
I'd like to control these 433mhz rc outlets with a 433mhz module or cc1101, but i don't understand the output of rtl433. It thinks the remote is a Smoke-GS558. Here are the signals from the 8 but…
-
**Have you looked for this feature in other issues and in the docs?**
Yes
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the…
-
Dear Bruno,
my congratulations for squeezing a RV32I core into the Icestick !
I read your Verilog files with joy and I wish to share an idea on how to save a few more LUTs for more peripherals: …
-
Hi. Thank you for great work.
Trying to compile firmware for bk7231.
Adding component:
```
remote_transmitter:
pin: D7
carrier_duty_percent: 50%
```
Causes compiling error:
```
undef…
-
**Describe the problem you have/What new integration you would like**
The Lyligo T5-4.7inch is a great e-paper module based on an ESP32. It has a resolution of 960*540, 16 gray level and support …