-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
Hello Danielje:
It is a pleasure to learn your ABESTAT.
Using 100K resistance in the circuit to convert the 200mV p-p of AD5933 output to 20mV p-p, but how does the system calculate the correct valu…
GY-RX updated
3 years ago
-
While trying out the new joint_impedance_controller, I noticed that sometimes I get an FRI error because of "excessive commanded joint speed" (in T1).
I think it could be useful to pass a maximum d…
-
**Reported by jriel on 8 Sep 2016 18:13 UTC**
The current implementation of Modelica.Electrical.Analog.Lines.TLine1 (and TLine2 and TLine3) uses four delay elements. Because delay elements are expen…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…
-
```
What steps will reproduce the problem?
1. Use r1.1 code with default voltage reference (1.1V)
2. Use a Witespy KV modded minimOSD board (22k/1k dividers)
3. Increase GUI calibration to max (255)
4…