-
Hi,
I am using a CNC Shield v3 with GRBL 1.1. I have dual Y motors, one being cloned from driver A. I have an end stop on the Y motor that is using the Y driver. I would like to add another end stop …
-
-
# Use Case
Before porting code, it's a good idea to verify that it works, in case it doesn't and for something to compare to later.
# Acceptance Criteria
**GIVEN** a tuned roboclaw and motors with en…
-
When the new g-code command is added to the firmware (see https://github.com/mariolukas/FabScanPi-Firmware/issues/6) It would be nice to have the possibility to change the firmware settings like the u…
-
Hello. I will repeat my question here, because this topic is closer.
> Hello dear developers! Can I ask you to make examples on servo or stepper motors control? Ideally, these are blinds. PLEASE! T…
-
Hello,
Using old drivers 2009_FFD_1 x360ce used to make vibrations working.
Using the actual drivers 2015_FFD_1 x360ce doesn't manage to make vibrations work anymore, motors do not respond using the …
-
# Use Case
As we're trying to use nav2, we need to have a ROS2 driver.
# Acceptance Criteria
**GIVEN** a tuned roboclaw and motors with encoders
**AND** the ROS2 driver is running
**WHEN** publishing…
-
In continuation of https://github.com/Candas1/Split_Hoverboard_SimpleFOC/issues/5
I have added the needed code to my cloned fork but can not push because Github_Desktop hangs and therefore can not …
-
```
Steps will reproduce the problem?
1.Run x360ce.exe and load appropriate profile for USB Vibration Joystick
2.Select force feedback tab
3.Test left motor
What is the expected output? What do you …
-
Hi everyone, I am planning to use the following setup with my pi juice zero:
- Pi Zero, Pi Juice Zero, DFRobot Motor Driver hat, and a fan
The driver hat requires an external power source to pro…